News

As the evaporator of the refrigerant vapor absorbs, the powerful lithium bromination from the generator solution is sprayed over the entire absorbe...

​The hydraulic refrigerant flows from the upstream casing to the downstream shell condenser and evaporator, and the evaporator is sprayed in the tu...

Therefore, it must be noted that the condenser should be cleaned regularly (please use according to the use). It is recommended to use a high-press...

After the generator exits, the heat exchanger is thinned to the action of the upper shell solution. The solution carries out any steam or hot water...

When used as an injection molding machine mold cooling, it can be calculated according to the injection volume of the injection molding machine.

​In industrial applications, chilled water or other liquid cooling pumps are passed through process or laboratory equipment. Industrial chillers ar...

When the chiller is molded, the clamping force required is different depending on the type of raw materials and the size and shape of the molded pr...

These cooling coils transfer sensible heat and latent heat from the air to the chilled water, thus typically dehumidifying the cooling air stream.

​The chiller is a water cooling device. The chiller is a cooling water device that provides constant temperature, constant current and constant pre...

​The chiller is divided into two types: air-cooled chiller and water-cooled chiller. The chiller is divided into a low-temperature chiller and a no...

In order to reduce the ceiling and reduce the rework costs, the drain pipe of the condensate pan was connected to the floor drain of the toilet. Th...

The muffler is a device that utilizes the principles of sound extraction, reflection, interference interference, etc., and low airflow and airflow ...