PCR lab layout is like this!
[the functions of each district are as follows]
Reagent preparation area: preparation, packing and storage of amplification reagents.
Sample processing area: sample registration and sub packing; Nucleic acid extraction, preservation and sampling.
Amplification products analysis area: determination, result analysis, registration and report of amplification products.
The pre amplification area and post amplification area should be strictly separated, and different rooms should be used. It is better to have a certain interval between the two areas.
A small amount of reagents can be prepared in the sample processing area by using commercial kits.
On the premise of meeting the following operation and cleaning requirements, the sample processing area and reagent preparation area can be set in the same room:
Operate in biosafety cabinet;
Each experimenter and experimental group used their own reagents and consumables respectively;
Containers containing contaminated materials shall be sealed and disposable;
Clean and disinfect the operation area and shared instruments with effective methods before and after the experiment.
MS.CINDY LI
Contact person :Cindy
Email: [email protected]
Telephone:86-757-88364517
Mobile Phone/Wechat/Whatsapp:+86-13794014063