Knowledge

During the operation of daily chillers, 70% to 80% of the load operation energy consumption is far lower than 100% of the load operation, so the speci

The chilled water flow refers to the cold water flow required when the machine is working, and the unit needs to be converted into liters per second;

Low noise fan motor, excellent cooling and condensation effect, stable throttle mechanism, excellent anti-rust treatment.

Therefore, in order to extend the service life of the mainframe and achieve better cooling performance, maintenance and maintenance should be done reg

The condenser heats up well, otherwise the condensing temperature and the corresponding condensing pressure will be too high, so that the high-pressur

​A chiller is a machine that achieves refrigeration by steam compression or absorption cycles. These liquids can flow through the heat exchanger to co

With evaporative cooling and heat dissipation, the coefficient performance (Conference of the Parties) is very high, generally more than 4.0.

The liquid reservoir is installed after the condenser and is in direct communication with the drain pipe of the condenser.

The single effect absorption cycle is used as a refrigerant and lithium bromide as an absorbent. It is a strong affinity, and the two substances work

​The first point: keep the surface of the chiller filter clean, air around the filter, clean the filter regularly, and generally purge the filter once

​Industrial chillers are typically used as closed-loop systems for complete packaging, including hot and cold water units, condensers and circulating