Name: China Customized Mask Factory Workshop AHU Conditioner Manufacturers - Low Price - Head-Power
Brand: Head-Power
SKU: 112284982

Mask Factory Workshop AHU Conditioner

Mask factory workshop AHU Conditioner. ZK series combined air-conditioning unit is a new type of air treatment equipment developed by HEAD-POWER based on accumulated years of central air-conditioning production experience. It has beautiful appearance, compact structure, convenient installation and maintenance, good rigidity and air leakage rate. Low-level features; according to user requirements, a variety of functional segment combinations can be provided, which are widely used in industrial air-conditioning places such as electronic meters, precision machinery manufacturing, textiles, chemicals, cigarettes, pharmaceuticals, food, power stations, etc. Supermarkets, theaters, exhibition centers, gymnasiums, shopping malls, hotels, office buildings and other high-use and civil air-conditioned places for large and medium-sized public buildings

Send Inquiry

Chat Now

Guangdong Head-Power Air-Conditioning Co., Ltd. is one of the leading manufacturers and suppliers of mask factory workshop ahu conditioner in China, also supports customized service with low price. If you're going to buy advanced mask factory workshop ahu conditioner made in China, welcome to get quotation from our factory.

Mask factory workshop AHU Conditioner

Wind pressure switch:

In the case of automatic control, the pressure difference between each section can be monitored, and an alarm is issued when a certain value is reached to remind the user to replace the filter bag, etc.; or the pressure difference between the inside and outside of the air conditioner can be monitored to prevent accidents, such as dirty filters Or, in winter, the pressure difference between the inside and outside of the air conditioner caused by the freezing of the wet film in the spray section will cause damage to the structure of the air conditioner. If the above situation occurs, a shutdown signal will be issued and an alarm will be issued at the same time.

Drain elbow: A certain pressure difference is formed to facilitate the condensate to be smoothly discharged from the air conditioner under negative pressure, while preventing air leakage.

Check and prepare the air conditioning box before starting:

1. The air conditioner is fully installed without any omissions;

2. The air conditioner fan and motor rotate flexibly, without abnormal sound and blocking phenomenon;

3. The drive belt between the fan and the motor is installed in place, the tension is appropriate, the pulley is on the same plane; the tension test;

4. The air valve at the inlet and outlet of the air conditioner is fully opened. If there are also air valves at the branch air outlets, make sure that each air valve is fully opened;

5. Urge the person in charge of electricity to measure the power supply voltage to ensure that the voltage is stable within the normal range, and there is no lack of equal abnormalities;

6. It is recommended to ensure that the primary effect filter is fully installed before starting up each time, so as to protect the back-end devices such as surface coolers and heaters;

Surface dust or heater surface dust should be cleaned once a year;

The muffler is cleaned once a year to remove the dust in the small holes by blowing with compressed air or brushing;

The sprinklers of the spraying section shall be inspected once a week, and any clogging shall be cleared in time.