Product Features:
1. Convenient for Stand Up Split Commercial Air Conditioner selection
- Wide application range
Head-Power split type air conditioners are designed and manufactured to meet the requirements of the home, office, hotel and others public occasion use. Standard cooling capacity is from 3Ton to 100Ton.
- Colour & Type selection
In order to satisfy the needs of different building style, the frame & panel can be ordered in either white or dark grey colors. Available in 3 installation types: ceiling concealed, floor standing ducted and floor standing free blow.
- Panels selection
Panels can be constructed of galvanized steel coated or Panels are double-skin with injection of high density polyurethane.
- Optional additional function section
Mixing section / Filter section / Electrical Heater section / Hot Water Coil section etc.
2. Outstanding reliability of Stand Up Split Commercial Air Conditioner
- Economy
Some models feature the flexibility and economy of 2~4 stages operation. Compressors are progressively switched on only as they are needed. This has the added advantage of lowering start-up current.
- Durable construction
• Standard cabinets are constructed from high grade galvanized steel with polyester powder coated.
• All units are tested at the factory to make sure no leakage and provide reliable start up.
- Reliable scroll compressor
• All units are equipped with direct-drive, hermetic, scroll type compressor, the voltage utilization range is ±10% of unit nameplate voltage. The compressors are mounted on rubber damper to reduce noise. An electric heater around the compressor crankcase to ensure stability starting.
• Famous brand compressor: Copeland, Panasonic and Danfoss. More reliable.
- Outdoor fanThe outdoor fan is multi-blade vane-axial type, made of aluminum alloy for quiet operation and durability. It is directly driven by waterproof motor to ensure reliable continuous operations.
- Indoor fan
The indoor fan is centrifugal type. The fan is directly driven & belt driven by waterproof motor. The fan and motor assembly is tested and dynamic balance is implemented in the factory.
- Multi-protection design
• Electric panel consists of breakers and contactors for compressors & fan motors, phase sequence relay and other necessary protection devices to ensure units operate normally and reliably.
• All electric parts are Schneider Electric brand.
3. Quieter operation
• Compressors and low noise Supply Fan are mounted on rubber vibration dampers.
• Wave type acoustic Insulation for compressor section, the inside of indoor unit panels will be covered with 10mm insulation to prevent heat and noise coming out.
4. Easy to installation and maintenance
• The units are completely assembled, internally wired, charged outdoor unit with refrigerant at the factory. The site work only needs to connect refrigerant pipes and communication wires between outdoor & indoor unit.
• Quick release fasteners provide convenient access to system components for maintenance and service.
5. Control system
• Stand Up Split Commercial Air Conditioner is completely factory-wired with necessary controls and terminal block for power wiring.
Technical specification:
Stand Up Split Commercial Air Conditioner | |||
Indoor Model No. | HAM / HAD / HAL | ||
Unit Performance | Cooling Capacity | kW | 7.8~250 |
Air Flow | m3/h | 1350~35000 | |
Power Supply | 220V/380V/415V/440V-3N-50Hz/60Hz | ||
Refrigerant | R22/R407c/R410a/R134a | ||
Indoor Unit | Evaporator | Copper tubes with aluminum fins | |
Fan and Motor | Fan Type | Ultra-low-noise Centrifugal | |
Power | kW | 0.3~20 | |
Start Method | Direct-drive | ||
Connecting Method | Flare opening | ||
Outdoor Model No. | SW | ||
Outdoor Unit | Compressor | Type | Hermetic scroll compressor |
Power | kW | 2.25~72 | |
Condenser Type | Copper tubes with aluminum fins | ||
Condenser Fan | Type | Ultra-low Axial fan | |
Power | kW | 0.37~8.8 | |
Connecting Copper Tubes | Gas tubes | Size(mm) | Φ19.1/Φ28 |
Quantity | 1~8 | ||
Liquid tubes | Size(mm) | Φ12.7/Φ15.9 | |
Quantity | 1~8 | ||
Connecting Method | Flare opening | ||
FAQ:
Q1：Are you a manufacturer or trading company?
A1：We are a manufacturer which specialized in produce HVAC product since 2001.
Q2：How do you ensure the quality of products?
A2：Quality and integrity is our corporate culture, each product will pass strict inspection to the factory.
Q3：What's your terms of packing?
A3：Polyfoam and wooden case. It will be very safe for shipping.
Q4：What is your company's after-sales service?
A4：Our warranty period is one year. If there is any problem in this year, we will send you the new parts for replacement. Meanwhile, welcome to consulting the technical knowledge.
Hot Tags: Stand Up Split Commercial Air Conditioner, China, manufacturers, customized, quotation, low price, made in China, Commercial Split Air Conditioner, 35 Ton Central Split Air Conditioner, Central Air Conditioner Cost, 180000 Btu Split Air Conditioner, 12HP Air Cooled Split Conditioner, Ceiling Heat Pump Split Package Unit
