HEAD-POWER Chilled water air handling unit
Heat exchanger:
The manufacturing process uses mechanical expansion tubes to ensure good contact between the copper tube and the aluminum foil bell mouth. There are also many choices such as hydrophilic aluminum foil, copper foil, steel tube steel sheet, steel tube aluminum sheet and stainless steel coil. The surface cooler, hot water coil and steam coil of the HEAD-POWER air conditioner are selected by professional selection software. The software is more reliable.
• Low noise:
HEAD-POWER air handling unit motor has high safety factor and low noise. The low-noise fans used have undergone rigorous dynamic and static balance experiments and are selected through professional fan application software to obtain the best fan operating point, fan efficiency and noise level. Both the fan and the motor assembly have unique vibration damping devices. The air outlet of the fan and the panel are flexibly connected to minimize the vibration and noise of the unit. The unique sealing structure prevents the noise from being transmitted outside the unit, so we provide you with a quietly running unit to meet the application of different requirements in various industries.
•filter:
The filter adopts nylon filter, the filtration efficiency can reach 80% (weight method), the filter screen can be drawn out and cleaned, and the replacement is convenient.
• Long air supply distance:
① The jet unit adopts a spherical tuyere with excellent jet performance as the air inlet, which can make the cold and hot air be sent to a sufficient distance.
② The air outlet direction of the spherical air inlet can be horizontal air supply or vertical air supply. Especially suitable for large spaces, especially under the warm air of large-scale workshops.
③ The air supply angle can be adjusted manually up and down within the range of 60 °, so that the cold and hot air can be delivered to the desired position
Equipment for regulating the temperature, humidity and cleanliness of indoor air. There are HEAD-POWER air heaters, air coolers, air humidifiers to meet the requirements of heat and humidity treatment, air filters for purifying air, mixing boxes for adjusting fresh air and return air, and mufflers for reducing fan noise. The air handling units are equipped with fans. According to the requirements of air conditioning throughout the year, the unit can be equipped with an automatic adjustment system connected to the cold and heat sources.
The HEAD-POWER new wind turbine unit mainly deals with the outdoor fresh air status point, while the air handling unit mainly deals with the indoor circulating wind status. Compared with the fan coil plus fresh air system and unit air conditioner, it has the advantages of large air volume, high air quality, energy saving, etc. It is especially suitable for large spaces and large people flow systems such as shopping malls, exhibition halls and airports.
