Name: Head-Power Manufacturer Water Cooled Chillers Price
Brand: HEAD-POWER
SKU: 95891365

1. Head-Power Manufacturer Water Cooled Chillers Price are safe operation balance, small vibration, simple installation.

2. Head-Power Manufacturer Water Cooled Chillers Price are compact structure, small footprint, light weight, easy to handle.

3. The control interface directly displays the fault content, which is convenient for timely understanding and troubleshooting.

4. Head-Power Manufacturer Water Cooled Chillers Price are direct cooling mode greatly improves the working efficiency; Compared with indirect cooling method, energy saving is more than 35%.

5. Head-Power Manufacturer Water Cooled Chillers Price are powerful protection device: compressor delay start protector, overload protector, high and low pressure protector, temperature control switch, anti-freeze switch, fuse plug, electronic time protection safety valve, compressor overheat protector, compressor frequent start protector and abnormal indicator light, to ensure the normal operation of the unit.

Technical specification:

Water Cooled / Ground Source Scroll Water Chiller
Model NO.		HWWC
Cooling capacity	kW	15-150
Power supply		220V-380V-460V/3PH/50Hz-60Hz
Refrigerant		R22/R407c/R410a/R134a
Compressor	Type		Hermetic scroll compressor
Safety measures		High&low pressure switch, internal overload protector, insufficient water protector, etc.
Evaporator	Type		Shell and tube type
Inlet/Outlet water temp.	℃	12/7℃
water flow	m³/h	3-27.5
water pipe	DN	25-50*2
Condenser	Type		Shell and tube type
Inlet/Outlet water temp.	℃	30/35℃
water flow	m³/h	3.3-34.5
water pipe	DN	25-50*2

Note:
1.Nominal cooling condition: evaporator inlet/outlet water temp. 12/7℃,condenser inlet/outlet water temp. 30/35℃.
2.The unit doesn't include water pump and water tank.

chiller price water cooled

chiller price scroll type

Precautions when using：

1. Before using the water-cooled industrial chiller, it should be checked whether the valves between the equipment are all opened, whether the water tank is filled with water, whether the fan of the cooling tower is reversed, and whether the running direction of the circulating pump is correct.

2. Turn on the main power supply. The specific can be directly compared with the nameplate on the front of the water-cooled chiller. The power supply to the chiller must be stable, so as not to burn the unit or compressor, pump motor.

3. First turn on the cooling switch, and then turn on the frozen water pump switch. Because the compressor has the delayed start function, the compressor will run automatically after the delay. At this time, pay close attention to the control panel on the front of the water-cooled industrial chiller to observe the temperature change, and the temperature can be adjusted according to the refrigeration demand.

4. During the normal operation time of the water-cooled chiller, the operation data of the unit should be recorded regularly, so as to find out the problem point according to the data as soon as possible when the unit fails. The chiller itself is equipped with multiple protection devices. Once there is a fault, it will start the protection and stop automatically. After troubleshooting, it can run normally by pressing reset.

5. When the machine is shut down and does not use water-cooled industrial chiller, the water in the unit, water tower, water pump, thermal insulation tank and pipeline should be drained, and the equipment should be covered and protected to avoid dust and other sundries.

6. About the maintenance of the chiller, this point can not be ignored, the equipment is like your car, in a certain number of kilometers after the maintenance of the truth is consistent. The chiller needs to clean the condenser and evaporator after running for half a year. It is best to maintain the whole machine after running for one year, and keep the cooling tower clean and clean regularly.

chiller factory