Industrial and commercial dehumidifier equipment
This is swimming pool thermostat dehumidifier
This can make the air temperature rise B, The evaporator and air regenerative condenser use copper tubes and aluminum fins to achieve the heating purpose. If the pool water needs to be heated, the high-temperature gaseous refrigerant will flow into the pool water condenser, and the energy will be applied to the entered pool ② in order to avoid the influence of the chlorine air in the swimming oil space on the adjacent rooms, our system design adopts the negative pressure design to control the exhaust air volume more than the same time of heating the pool water, The high-temperature gaseous refrigerant also condenses about 10% of the fresh air, so as to ensure that the fresh air can enter the pool space through the doors and windows and the micro seams, and the air in the pool space will not diffuse to the constant temperature chicken machine of its ice pool to form a warm liquid. If air cooling is needed, the room state refrigerant of high-temperature gas will bypass the air reheating coil and oil-water condenser to flow to the liquid reservoir 13, evaporation dial 14 and fluorine heater, so that the cold air from the evaporator can provide air cooling to the indoor 15, air supply motor 16, external fan 17 and the swimming pool. 3. The temperature sensor to prevent condensation and condensation can avoid condensation and condensation on the interior glass window and the exterior wall of the rabbit (it must be ensured that the indoor structure will not be corroded and damaged due to the high dew point temperature under the condition that the effective insulation measures are taken in the building). The principle is that the special heat pump type constant temperature dehumidifier for indoor cold proof poolstar Swimming Stadium When the temperature at the unfavorable point is too low due to the outdoor temperature drop, the anti condensation temperature sensor installed in the place will feed back the temperature of the cold surface to the setting 1. The ultra-low energy consumption system will automatically reset the indoor relative humidity to make the temperature always higher than the adjusted dew point, so as to prevent condensation and condensation. The poolstar energy wave regeneration system is used, The water vapor evaporated on the surface of the swimming pool can be used for heating for free, and the disadvantages still need to be solved in the design of the air system. In order to prevent condensation, the air supply outlet should be arranged with dry hot air blowing on the outer wall or glass controller to supplement part of the heat with auxiliary heat source. The equipment is controlled by full automatic microcomputer, A new advanced control technology, called dew point temperature control, is used in the work. This control method is more accurate than the traditional relative control. The main purpose of dehumidification system is to make the swimming pool area 4. Nowadays, the most effective and flexible indoor swimming pool constant temperature dehumidification environment control system keeps the water content at the humidity that does not cause damage to the building. Relative temperature is a measure of water content, that is to say, the poolstar equipment containing water in the air at a given dry bulb temperature is the most effective and flexible representative of the constant temperature and humidity environment control system of indoor swimming pool. It simultaneously uses the percentage between the air supply and return and the maximum water content that the air can hold under the given dry bulb temperature. Warm air can contain more fans and full adjustable baffles than cold air. Combined with dry bulb temperature and dew point temperature, the fresh air can be accurately measured, which is compared with another system using dry bulb temperature and enthalpy or much water. Therefore, in the actual water content of air, there is no comparison of any similar system with hole degree. Air control is ensured. This fully adjustable feature can make full use of heating, cooling and dehumidification energy-saving technology. When the energy-saving technology can be changed, the reading of relative humidity is more energy-saving with the operation process of low dry bulb temperature refrigerant program. As the main product of poolstar series equipment, a mixing box is installed between the downward direction of the evaporator and the upward direction of the condensation coil to better control the air flow. With the accurate dehumidification, heating and wine air point control of indoor environment, the equipment well is operated to make the moisture content lower than the set value. Under the energy-saving mode, intelligent energy-saving mode and CO2 ventilation mode, the dry bulb temperature and relative humidity of the energy efficiency space can be optimized, which determine the dew point temperature by changing the set value of space temperature and space relative humidity, The water heater for 5 high efficiency anti-corrosion pool water heating pool shall be a counter current spiral winding coaxial tube sleeve type heat exchanger for maximum limit.













Inquiry products information please contact :
Company :Guangdong Head-Power Air Conditioning Co.,Ltd
Contact person :Cindy
Hot Tags: industrial and commercial dehumidifier equipment, China, manufacturers, customized, quotation, low price, made in China, 100KW Desiccant Wheel Dehumidifier, Industrial And Commercial Dehumidifier Equipment, Dehumidifier For Basement Greenhouse, 190L D To 5000L D High Effect Dehumidifier, Swimming Pool Industrial Dehumidifier, Industrial 150l Dehumidifier







