Home / Products / Air Cooled Scroll Chiller

Hospital Heat Pump Water Heater

The air source heat pump unit is used to exchange heat with the air to make heat for the indoors. Therefore, the air source heat pump main unit must be installed in a place where the air is unblocked. It should not be installed in a narrow patio or surrounded by a fence. The air source heat pump main unit mainly for heating should be installed in a sunny place. The platform or place where the air source heat pump main unit is installed must have room for maintenance. The air source heat pump system consumes a large amount of electricity, especially when installing electric auxiliary heat, the electric quantity will increase, so it is necessary to pay attention to whether the electric capacity is satisfied during design. When the air source heat pump main pump is externally installed, the heat pump main unit must have interlocking control with the water pump and cannot be operated in isolation.

Send Inquiry

Chat Now

Hospital Heat Pump Water Heater

Hospital Heat Pump Water Heater Features :

The hospital hot water supply system needs to solve the following problems:

1. Hot water supply is the basic service of the hospital. 24 hours supply must be guaranteed.

2. To ensure a reasonable water temperature and stable water pressure.

3. The passenger flow is not very uniform, and it is easy to have a peak water period, but all must ensure the comfort of the guests' water.

4. Reduce the installation cost, use cost and maintenance cost as much as possible.

5. Take into account environmental protection, safety and other factors.

Basic parameters required for the design of hospital hot water supply system:

1. How many houses are there for each purpose? Is it uniform or separate?

2. How many beds are there? Each bed is calculated according to 100L of hot water every day

3. Water usage in kitchen, dining room, public hand-washing toilet, doctor's hand-washing station, etc.?

4. Is there heat insulation of the pipes below several floors of the hospital floor to determine the heat loss of the water pipes?

7. Equipment installation site (length, width, orientation, and surrounding buildings)

By providing the above parameters, we can roughly design a suitable hot water project for you, and ensure the normal supply of hot water in a more cost-effective way.